SSL Series
The SSL series in galvanized steel is suitable
for all panel types and can be used in any
environment. It can
support fairly high loads and, while normally used with
open section stringers it can be further reinforced with
the use of closed section stringers, which increase its
load-bearing capacity.
SSL TR1
Connecting stringers in 0.9mm thick, galvanized
steel U section, 18mm deep, slotted into the
shaped pedestal
heads and fitted with PVC gaskets.
SSL TR2
Connecting stringers in 0.9mm thick, galvanized
steel U section, 18mm deep, slotted into the
shaped pedestal
heads and fitted with PVC gaskets.
SS L TR3
Connecting stringers in 1.0mm thick, galvanized
steel closed box section 25 x 25mm, screw fixed
to the pedestal
heads and fitted with adhesive gaskets.
 |
A Acoustic gasket.
B Stringer connected to the shaped pedestal
head.
C Square, shaped pedestal head, 90 x 90
x 2.5 mm.
D 16 MA threaded stem.
E Micrometric height adjustment nut. (Not
for reduced height pedestals)
F 20mm diameter tube, 2mm thick.
G 95mm diameter shaped base, 1.5mm thick.
|
SSP Series
The SSP “heavy-duty” structure in
galvanized steel is recommended for very heavy
loads and is suitable for all types of panel.
SSP TR1
The 50x25mm closed box section stringers, in
1.0mm thick galvanized steel, are in two sizes,
550 and
1800mm and are fitted with adhesive anti-rumble gaskets.
 |
A Acoustic gasket.
B Tubular stringer connected to the pedestal
heads with grub screws.
C Pressed cross-shaped head, 110 x 110
x 3mm.
D 16 MA threaded stem.
E Micrometric height adjustment nut. (Not
for reduced height pedestals)
F 20mm diameter tube, 2mm thick.
G 95mm diameter shaped base, 1.5mm thick.
|
photo gallery
|
