CUT ECO: design by idivision - Progetto CMR. Family of recessed, wall-mounted and suspension luminaires for fluorescent T16 lamps.
EVOLUTION BLACK: methacrylate obtained with the most advanced techologies, professional light sources, high feasibility of installation make EVOLUTION a protagonist in the lighting world. The brightness and depth in the gloss black methacrylate can be enhanced by the use of coloured dichroic filters.
MULTI OFFICE: design Daniel Bernard. Series of pendant modules for 2x54W T16 fluorescent lamps for indirect or direct/indirect lighting. Modules can be installed singularly or assembled into a system. Power-factor-corrected electronic ballasts shielded against radio interferences 220/240V-50/60Hz. Direct/indirect version available with aluminium low luminance grid with 14x14 mm cells for a perfect control of the direct emission.
SLIM RECTANGLE: design by Daniel Bernard. Series of rectangular suspended modules for fluorescent T16 FH 2x28W or FQ 2x54W with direct/indirect and only indirect light emission. Dual wattage electronic ballasts for T16 2x28W or T16 2x54W 220/240V-50/60Hz. Body in extruded anodized aluminium, width 26 mm, height 50 mm. Bottom screen in satin polycarbonate, lined for a better light distribution and top anti-dust cover in transparent polycarbonate. Steel suspension cables, lenght 2.100 mm with system of micrometric regulation of the length. Complete with canopy. Degree of protection IP40.
MULTI Store 2: design Daniel Bernard. Ceiling mounted luminaire for adjustable halogen QR-LP 111 12V max 50W, HIPAR 111 max 35W or halogen dicroic QR-CB 51 12V max 50W lamps. Adjustability of lamps +/-50° on axis. Body in metal with aluminium finish and plate in transparent metacrylate with serigraphy. Complete with electronic transformer 230V-240V/12V 50-60Hz or 230V/240V ballast. Available also in the suspended and wall mounted versions.
IO: design by Daniel Bernard. Series of linear suspended modules for fluorescent T16 FH 2x28W or FQ 2x54W with direct/indirect or only indirect light emission and adjustable halogen dichroic QR-CB 51 12V max 50W or QR-LP 111 12V max 50W lamps (electronic transformers 230V-240V/12V included). The modules may be installed singularly or assembled into a system, by means of an accessory for the junction in a straight line or with an accessory for 90° angles.
GALILEO: suspended system in extruded aluminium with direct and indirect light beams suitable for linear fluorescent T5 Ø16 lamps. Galileo is made of extruded aluminium profiles, carefully finished, available in standard RAL 9006. It gives an elegant and high-tech look to the environment which acquires a sobriety of style. Made to suit linear fluorescent T5 lamps, it provide appropriate illumination thanks to its several louvres and to its two components with direct and indirect lighting beams. By using the “multigrade rotating joint”, Galileo allows to build the most complex illumination systems. Rigidity and compactness allow to save time during installation and assembly because a lower number of suspensions is required. Galileo is an elegant and innovative lighting solution which offers a correct illumination system.
LEONARDO: extruded aluminium lighting fitting, to be suspended or wall mounted, suitable for linear T5 Ø16 lamps, available in two versions: indirect and direct/indirect light beams. Leonardo is made of three extruded aluminium profiles. It has a linear design, which makes it suitable for many kinds of environment. In the wall mounted version it loses one of the three profiles in order to perfectly adjust to the wall. Leonardo, thanks to its characteristics, can satisfy several illumination requirements. It can vary in length, colour and light intensity. Also available in the direct/indirect light beam version with a parabolic louvre in the lower part, to control the direct light. Easy to install, the suspending version has rigid rods of different height to suit any installation requirement. An illumination system of considerable length can be built, particularly useful when a no gap system is required.
ECLISSI: direct/indirect lighting for use in false ceiling constructions, with double parabolic louvre to control direct emissions, suitable for linear fluorescent T5 Ø16 and compact fluorescent TCL/PLL lamps. Eclissi is the direct/indirect light beam Luna version. The visual comfort coming from the indirect emissions is joined to a strict control of the luminance of the direct light beam by means of a double parabolic louvre. Eclissi standard model is RAL 9006 grey, a colour which gives to the fitting a modern and technical look. Louvres are made of glare-free satin aluminium, PD5 type.
LUNA: “soft light” fitting for use in false ceiling constructions, suitable for linear fluorescent T5 Ø16 and compact fluorescent TCL/PLL lamps. Luna is an extremely versatile fitting, able to satisfy several illumination requirements. It belongs to the so-called “Soft Light” category, as it can create high visual comfort by means of the technical characteristics of the indirect light emission. Luna has been designed to suit different kind of lamps, which will require appropriate louvres, varying in location and dimensions. Glare can be prevented by the micro-perforation of the parabolic louvre, therefore a remarkable control of the illumination can be achieved. Thanks to its several characteristics, Luna represents the optimal solution for any interior decoration requirements.
HB: recessed fitting, with high protection degree, for use in modular or closed ceiling structures, suitable for linear fluorescent T5 Ø16 and T8 Ø26 lamps.
